This chapter
describes the operation procedures for using the machine more conveniently and each
setting procedure.
About User Types .........................................3-2
Registering All Printing Conditions Together
(Type Registration) ...................................... 3-2
How to Register User Types ....................... 3-2
Setting Media Correction .............................. 3-4
Setting Media Correction ............................. 3-4
If the Positions of Dots Shift... .......................3-6
Changing the Set Values of the Heaters ....... 3-8
Changing the Temperature Settings for
the Heaters .................................................. 3-8
Adjusting suitable temperature adjustment
(When solvent ink is used) ........................ 3-10
In case the heater temperature is too low . 3-11
Setting the Printing Method .........................3-12
Setting of the PASS (print quality) ............. 3-12
Setting a Scanning Speed ......................... 3-13
Setting a Scanning Direction ..................... 3-14
Setting Logical Seek ................................. 3-15
Setting Drying Time ....................................3-16
Setting Margins ...........................................3-17
Setting Color Pattern ...................................3-18
When you use ink other than Sublimation
dye ink ....................................................... 3-18
When you use Sublimation dye ink ........... 3-19
Setting Automatic Cleaning .........................3-20
Setting Cleaning during Printing ..................3-22
Setting the CLEANING ..............................3-22
Setting the WIPING ...................................3-23
Setting Media Detection ..............................3-25
Other Settings .............................................3-26
Initializing the Settings ................................3-27
Machine Settings .........................................3-28
Setting the DRYING FAN ..........................3-29
Perform setting of feeding and take up ......3-30
Setting the DRYNESS FEED .....................3-32
Setting CONFIRM. FEED ..........................3-33
Setting Time ...............................................3-34
Setting Units ..............................................3-35
Stamp Setting ............................................3-36
Setting the MACHINE NAME .....................3-37
Setting a KEY BUZZER .............................3-38
Change the operation condition of the
ambient temperature ..................................3-39
Extension of Ink Expiry Month .....................3-40
Extension of Ink Expiry Month ...................3-40
Switch Setting of Ink Supply Path ...............3-42
Confirming Machine Information .................3-44
Displaying the Information .........................3-44
Chapter 3
Extended Functions
To Next Page
Loading...
