A-5
A.2.5 Audio Indicator
Speaker
Give alarm tones (45 to 85 dB), key tones, QRS tones; support
PITCH TONE and multi-level tone modulation; alarm tones
comply with IEC60601-1-8.
A.2.6 Alarm Signal
Alarm output delay Less than 1 second
Pause duration 1, 2, 3, 5, 10, 15 minutes or infinite, depending on configuration
A.2.7 Monitor Interface Specifications
Power 1 AC power input connector
Measurements ECG, RESP, TEMP, SpO2, NIBP, IBP, CO, CO2, AG
Wire network 1 RJ45 connector, 100 Base-TX, IEEE 802.3
USB (optional) 2 connectors, USB 1.1
CF 50-pin CF revision 2.0 connector
Video interface 1 standard colour VGA monitor connector
Auxiliary output
1 connector, standard BNC, the common connector of nurse call
signals, analog output signals and defibrillator synchronization
signals
Equipotential Grounding
Terminal
1
RS232 connector 1 connector, supports DIAP communication protocol
To Next Page
Loading...
