Mindray TE9 - Send Structured Reports for Storage; Back up Structured Report

11 - 6 Operator’s Manual
11 DICOM/HL7
NOTE:
Only the PACS system from the Medstreaming company (http://www.medstreaming.com/
default.aspx) supports sending self-defined measurements by DICOM SR.
11.9.1 Send structured reports for storage
Perform the following procedure:
1. Create new patient information or load scheduled patient information.
2. Perform measurements.
3. Save the images.
4. End the exam.
5. Open the iStation screen, select the patient exam, and tap [Send To] to open the Send To dialog
box.
6. Select “DICOM” in the Target box on the left side, then select the DICOM storage server in
the Storage Server box on the right side.
7. Tap [Send]. Check for the result in the DICOM Task Management dialog box.
The structured report can be sent automatically.
11.9.2 Back up structured report
When recording or storing exams that have structured reports to external media (DICOMDIR), the
structured reports can be backed up together.