Mindray TE9 User Manual

14 - 4 Operator’s Manual
14 System Maintenance
14.1.2 Cleaning the peripherals
Do the cleaning maintenance according to your actual peripheral configuration; items which are not
configured can be skipped.
14.1.3 Disinfecting the Main Unit
WARNING
• Use only Mindray approved disinfectants and methods listed in this section
to disinfect the main unit. Warranty does not cover damage caused by
unapproved substances or methods.
• Do not mix disinfectants, as hazardous gases may result.
• We make no claims regarding the efficacy of the listed chemicals or
methods as a means for controlling infection. For the method to control
infection, consult your hospital’s infection control officer or epidemiologist.
CAUTION
• Never immerse any part of the main unit in liquids or allow liquid to enter
the interior.
• Any contact of disinfectants with connectors or metal parts may cause
corrosion.
• Do not pour or spray any liquid directly on the main unit or permit fluid to
seep into connections or openings.
• If you spill liquid on the main unit, disconnect the power supply, dry the
main unit, and contact your service personnel.
• Never use abrasive materials (such as steel wool or silver polish), or
erosive cleaners (such as acetone or acetone-based cleaners).
• Dilute and use the disinfectants according to the manufacturer's
instructions.
• Check the system after disinfection. If there is any sign of damage, remove
it from use.
• Follow local regulations when selecting and using the disinfectant.
Content Description
Color and B/W video
printer
First wipe off dust or stain attached to the cover of printer with soft dry
cloth, then clean the inside of printer. Be sure to do the cleaning
maintenance according to the operation manual if necessary.
Graph / text printer First wipe off dust or stain attached to the cover of printer with soft dry
cloth, then clean the inside of printer. Be sure to do the cleaning
maintenance according to the operation manual if necessary.
Footswitch Use soft dry cloth with a little mild soap water to wipe off the dust or
stain attached to the pedals or cable of foot switch.
Barcode reader First use soft dry cloth to wipe off dust attached to glass panel of the
reader, then the dust or strain attached to cable and bracket.

Mindray TE9 Specifications

General

Brand	Mindray
Model	TE9
Category	Speaker System
Language	English