I-23 Di251/Di351Rev. 11..0.0/03.01
right
3. Touch “Printer”.
4. Touch the key for the direction to be adjusted.
5. Touch “Test Print”.
6. Touch “Duplex” and press the start key.
Measure margins A and B on the copy.
Standard Values:
A4C 10.0 mm ± 3.0 mm
Letter C 10.0 mm ± 3.0 mm
If the measured width is not within the standard
values, use the following procedure for
adjustment.
A
B
Main scanning direction
Secondary Scanning Direction
To Next Page
Loading...
