2-6. IMAGE TRANSFER SECTION
(1) Removal of the Image Transfer Roller Assy
(2) Cleaning of the Comb Electrode
1. Open the Side Cover.
4011D009AA
2. Raise the Image Transfer Guide Plate.
4011D056AA
3. Remove the Image Transfer Roller Assy.
NOTE
• Do not touch the surface of the Image Transfer
Roller directly with bare hands.
4011D057AA
1. Open the Side Cover.
4011D009AA
2. Using a soft cloth dampened with alcohol, wipe
the Comb Electrode.
NOTES
• Make sure the alcohol does not touch the surface
of the Image Transfer Roller.
• When wiping the Comb Electrode, make sure the
cloth is not caught by the ends of the combs.
4011D058AA
To Next Page
Loading...
