2-7. DEVELOPING SECTION
(1) Removal of the Imaging Cartridge
1. Open the Side Cover.
4011D009AA
2. Holding onto the green handles, slide the Imag-
ing Cartridge part of the way out.
3. Then grasp the handle on top of the cartridge and
pull the cartridge out.
NOTE
• When installing the Imaging Cartridge, push it all
the way into the machine.
• If the cartridge is not properly installed, the PC
Drum protective shutter of the cartridge may not be
opened or may even be damaged.
4011D061AA
To Next Page
Loading...
