FrameMaker Ver.5.5(PC) Di251/Di351 TROUBLESHOOTING
05.03.01
T- 1 0
3-2. Size Error
• The following warning screen appears if the actual size of the paper loaded in a paper
source differs from the paper size set for that particular paper source.
✽ 1st to 5th Drawer: A size error is indicated by a highlighted paper source in the copier
overview display.
<Resetting the Size Error Display>
• Press the Panel Reset key.
• Slide out the drawer, then slide it back in, or load paper in the Manual Bypass Tray.
<Causes of a Size Error>
• Wrong paper size settings have been made.
• The user loads paper of a size different from what is set for the paper source.
• Two or more sheets of paper are being taken up and fed in.
1st to 5th Drawer Manual Bypass
4011T546CA 4011T547CA
To Next Page
Loading...
