Minolta Di251 - Double Feed Paper Take-Up Control (35-Cpm Copier Only)

FrameMaker Ver5.5E(PC) Di251/Di351 MECHANICAL/ELECTRICAL
.05.03.01
M-35
(4) Double Feed Paper Take-Up Control (35-cpm copier only)
• The following control is provided to minimize the occurrence of a paper misfeed due to
double feed. If the Double Feed Detecting Board detects a sheet of paper, the copier
retards the start of paper take-up sequence for the subsequent sheet of paper a period of
time equivalent to about 10 mm.
Electrical Component Control Signal Activated Deactivated Wiring Diagram
PWB-H PJ4A-2 L H 6-G
Double Feed Detecting
Board PWB-H
Paper Take-Up Roll
4011M010AA