I-74Di251/Di351 Rev. 1.1.0.0/03.01
left
1.11.7 Registration Adjustment
1. Check that the drawer is loaded with A4C or
Letter C paper and close it. Select this drawer
as the paper source and 1-sided 2-sided
copying.
2. Access the initial, Rep. Mode screen.
(Refer to the Service Manual for the
procedure.)
3. Press the stop key and then immediately
press the start key.
4. Touch “Printer”.
5. Touch the key for the direction to be adjusted.
6. Touch “Test Print”.
To Next Page
Loading...
