Minolta Di251 - Components; Installation

I-28Di251/Di351 Rev. 1.1.0.0/03.01
left
1.7.3 Components
Take the ADF out of the box and check that the following accessories are included.
1. ADF Glass Assy....................................1
2. Glass support........................................1
3. Tray.......................................................1
4. Holder ...................................................1
5. Screw (3×6mm Black)...........................3
Screw (4×8mm Silver)...........................3
1.7.4 Installation
1. Remove the Right Rear Cover.
2. Unplug the connector that is connected to the
copier.
NOTE
Tidy up the connector which has been removed
to ensure that it does not interfere with the
subsequent steps.
1
2
3
4
5