Minolta Di251 - Installation Pf-117; Unpacking

I-69 Di251/Di351Rev. 11..0.0/03.01
right
1.11 INSTALLATION PF-117
1.11.1 Unpacking
1. Remove the large capacity cabinet from the box and make sure that the
following accessories are contained in the box.
1. Fixing plate ........................................... 4
2. Flat-head screw .................................... 4
3. L-shaped stopper.................................. 1
4. Stopper .................................................4
5. Stopper cover ....................................... 2
6. Thumbscrew (short).............................. 4
7. Thumbscrew (long) ...............................2
8. Power supply harness .......................... 1
2. Remove the tape from each parts.
3. Pull out the tray and remove the packing
material.
NOTE
Be sure to remove the packing material before
setting the copier onto the Cabinet.
4. Return the tray to its original position.
1
2
3
4
5
6
7
8
Tape
Tape
Tape
Cushion