Minolta Di251 - Installation Js-100; Unpacking; Installing the Third Tray

I-9 Di251/Di351Rev. 11..0.0/03.01
right
1.3 INSTALLATION JS-100
1.3.1 Unpacking
Unpack the Third Tray and check that the following components are contained in
the box.
1. Exit Tray ..............................1
2. Front Cover .........................1
3. Rear Cover..........................1
4. Third Tray............................1
5. Screw (4 x 10 mm) ..............2
Remove tape and other fixing brackets.
1.3.2 Installing the Third Tray
1. Open the Finisher Cover.
1
2
3
4
5