FrameMaker Ver5.5E(PC)Di251/Di351 GENERAL
05.03.01
G-12
6. OTHER PRECAUTIONS
Use the following precautions when performing service jobs for a copier that uses a laser.
• When a service job needs to be performed in the laser beam path, such as when working
around the printerhead or PC Drum, be sure first to unplug the power cord of the copier
from the outlet.
• If the job requires that the power cord be left plugged in, observe the following precau-
tions.
1. Take off your watch, ring and any other reflective object and wear laser protective gog-
gles.
2. Keep users away from the job site.
3. Do not bring a highly reflective tool into the laser beam path during the service job.
To Next Page
Loading...
