Minolta Di251 - Settings in the Adjust Mode

FrameMaker Ver5.5E(PC) Di251/Di351 SWITCHES ON PWBs/TECH. REP. SETTINGS
05.03.01
S-33
6-4. Settings in the Adjust Mode
(1) Printer
• Adjust functions relating to the printer.
• Runs a test print sequence.
(2) IR
• Adjust functions relating to the I.R.
Touch Panel
Display
Setting
Registration (CD) Adjust registration in the CD direction on the engine side.
Registration (FD) Adjust registration in the FD direction on the engine side
35 CPM
25 CPM
Touch Panel
Display
Setting
Registration Adjust registration in the CD and FD direction on the IR side.
Zoom Adjust Adjust the zoom ratio in the CD and FD direction on the IR side.
-4.0........................................... 0...........................................+4.0
Smaller Greater
-19............................................ 0............................................+19
Smaller Greater
-26............................................ 0............................................+26
Smaller Greater
Main scanning (CD)
Subscanning(FD)
-72 dot...................................... 0......................................+72 dot
Smaller Greater
-24 dot...................................... 0....................................+127 dot
Smaller Greater
0.990.....................................1.000 .....................................1.010
Smaller Greater