Minolta Di251 - Types of Misfeed Detection and Detection Timings; 1 St Drawer Take-Up Misfeed; Manual Bypass Take-Up Misfeed

FrameMaker Ver.5.5(PC) Di251/Di351 TROUBLESHOOTING
05.03.01
T- 1 2
3-4. Types of Misfeed Detection and Detection Timings
• The following lists the types of misfeed detection and detection timings for different mis-
feed locations.
• The symbol “L” (for the leading edge) and “T” (for the trailing edge) given in ( ) indicate
the particular edge of the paper detected by the sensor.
NOTE
For the types of misfeed detection and detection timings of options, see the relevant option
service manual.
1st Drawer Take-Up Misfeed
Manual Bypass Take-Up Misfeed
2nd Drawer Take-Up/Transport Misfeed
Separator Misfeed
Fusing/Exit Misfeed
Type Detection Start Detection
Paper take-up failure detec-
tion
1st Drawer Paper Take-Up
Solenoid energized
Synchronizing Roller Sensor
(L)
Type Detection Start Detection
Bypass paper take-up fail-
ure detection
Manual Feed Paper Take-Up
Clutch energized
Synchronizing Roller Sensor
(L)
Paper left Power Switch ON / Misfeed
reset
Manual Feed Paper Take-Up
Sensor activated
Type Detection Start Detection
Paper take-up failure detec-
tion
Paper Take-Up Clutch ener-
gized
Synchronizing Roller Sensor
(L)
Paper left Power Switch ON / Misfeed
reset
Paper Take-Up Sensor acti-
vated
Type Detection Start Detection
Leading edge detection by
Paper Exit Sensor
Synchronizing Roller Sensor
(L)
Paper Exit Sensor (L)
Trailing edge detection by
Synchronizing Roller Sen-
sor / size error misfeed
detection
Synchronizing Roller Sensor
(L)
Synchronizing Roller Sensor
(T)
Paper left Power Switch ON / Misfeed
reset
Synchronizing Roller Sensor
activated
Type Detection Start Detection
Trailing edge detection by
Paper Exit Sensor
Synchronizing Roller Sensor
(T)
Paper Exit Sensor (T)
Paper left Power Switch ON / Misfeed
reset
Paper Exit Sensor activated