Minolta Di251 - 11 Original Size Detecting System

FrameMaker Ver5.5E(PC) Di251/Di351 MECHANICAL/ELECTRICAL
.05.03.01
M-17
11. ORIGINAL SIZE DETECTING SYSTEM
• When the copier is in Auto Paper or Auto Size mode, the Original Size Detecting Sensors
mounted at the optical section are used to determine the size of the original.
UN3: Optional only for the metric areas; not available for the inch areas
UN5, UN7: Optional
UN8: Optional for the inch areas; standard for the metric areas
Electrical Component Control Signal Activated Deactivated Wiring Diagram
UN3 CN2DSN-4 L H 17-D
UN4 CN5BCR-7 L H 14-A
UN5 CN5DSNS-4 L H 17-E
UN6 CN6BCR-4 L H 15-B
UN7 CN3DSNS-1 L H 17-E
UN8 (metric) CN8BCR-4 L H 15-C
UN8 (inch) CN4DSN-4 L H 15-F
4011M011AA
Original Size Detecting
Sensor 5 UN7
Original Size Detecting
Sensor 3 UN5
Original Size Detecting
Sensor 4 UN6
Original Size Detecting
Sensor 6 UN8
Original Size Detecting
Sensor 1 UN3
Original Size Detecting
Sensor 2 UN4