Minolta Di251 - Adjusting the Placement of the Punch Hole

To Next Page

To Previous Page

I-66Di251/Di351 Rev. 1.1.0.0/03.01

left

1.10.9 Adjusting the placement of the punch hole

Perform this procedure after the basic position

adjustments of the main unit’s Tray1 are finished.

1. Select the A4 horizontal tray.

2. Touch the “Non-Sort” key.

3. Touch the “Hole Punch” key.

4. Touch “Select Position”.

5. Select the position of the punch hole.

6. Press the Start key.

Mixed Orig Detection

Memory Free

Select a finishing mode. Use

SELECT POSITION to Select the

hole punching positon

Memory Free

OFF

Other manuals for Minolta Di251