FrameMaker Ver5.5E(PC)Di251/Di351 MECHANICAL/ELECTRICAL
05.03.01
M-30
14-2. 1st Drawer Paper Empty Detection
• The 1st Drawer Paper Empty Sensor detects a paper-empty condition.
• When a paper-empty condition is detected (sensor is blocked), the Paper Level LED
lights up.
14-3. 1st Drawer Paper Near-Empty Detection
• The 1st Drawer Paper Near Empty Sensor detects a paper near-empty condition.
• When a paper near-empty condition is detected (sensor is blocked), the Paper Level LED
starts blinking. A paper-empty condition results when about 50 more sheets of paper are
used after the paper near-empty condition has been detected.
Electrical Component Control Signal Activated Deactivated Wiring Diagram
PC4 PJ15A-14A L H 6-E
Electrical Component Control Signal Activated Deactivated Wiring Diagram
PC5 PJ3A-2B L H 6-H
1st Drawer Paper Empty
Sensor PC4
1167M073AD
Empty Lever
4011M026AB
1st Drawer Paper Near
Empty Sensor PC5
Near-Empty Lever