Minolta Di251 - Page 186

FrameMaker Ver.5.5E(PC) Di251/Di351 DIS/REASSEMBLY, ADJUSTMENT
05.03.01
D-5
✽1: Standard on the 25/35-cpm copier
✽2: Standard on the 35-cpm copier
No. Part Name Removal Procedure
29 Fixed Paper Size
Cassette
Connector Cover
(
✽1)
Unhook one tab and remove the Fixed Paper Size Cassette Connector
Cover.
30 Connector Cover Unhook one tab and remove the Connector Cover.
31 Harness Cover Remove one screw that secures the Harness Cover.
32 Lower Rear
Cover
Remove no. 31.
→ Remove no. 30. → Remove no. 28. → Remove three
screws that secure the Lower Rear Cover.
33 Upper Rear
Cover
Remove no. 31.
→ Open no. 7. → Remove three screws that secure the
Upper Rear Cover.
34 Rear Upper
Cover
Remove two screws that secure the Rear Upper Cover.