7. Enter the new setting value from the 10-Key Pad.
✽ Use the Access Mode key or "✽" to change the + or - sign.
Setting Instructions
If width A is wider than specifications, make the setting value smaller than the current one.
If width A is narrower than specifications, make the setting value greater than the current
one.
✽ If a single adjustment procedure does not successfully bring width A into the specified
range, try another setting value.
8. Touch "END" to validate the setting value.
NOTE
• Be sure to touch "END" to return to the normal operating mode. If the Panel Reset key is
used, the previous setting remains valid.
4011P259CA
4011D001AA
Setting Value
Usetochange
the + or- sign.
Usetoclear
setting value.
Use to enter setting value.
Use to change the + or- sign.
To Next Page
Loading...
