7. Enter the new setting value from the 10-Key Pad.
✽ Use the Access Mode key or "✽" to change the + or - sign.
Setting Instructions
If width A is wider than specifications, make the setting value smaller than the current one.
If width A is narrower than specifications, make the setting value greater than the current
one.
✽ If a single adjustment procedure does not successfully bring width A into the specified
range, try another setting value.
8. Touch "END" to validate the setting value.
NOTE
• Be sure to touch "END" to return to the normal operating mode. If the Panel Reset key is
used, the previous setting remains valid.
4011P259CA
4011D001AA
Setting Value
Use to change
the + or- sign.
Use to clear
setting value.
Use to enter setting value.
Use to change the + or- sign.
To Next Page
Loading...
