FrameMaker Ver5.5E(PC) Di251/Di351 MECHANICAL/ELECTRICAL
.05.03.01
M-5
4. OPERATING SEQUENCE
4011M028CA
Power Unit Cooling Fan Motor M4
Power Switch ON Start key ON
Cooling Fan Motor M3
Ozone Fan Motor M8
Main Motor M2
Fusing Roller Heater Lamp H1
Manual Feed Paper Take-Up Clutch CL2
1st Drawer Paper Take-Up Solenoid SL1
Polygon Motor M5
Synchronizing Roller Sensor PC2
Synchronizing Clutch CL1
Paper Exit Sensor PC3
I/C Motor M1
Laser
Drum Charge Bias
Image Transfer Bias
Developing Bias
Full speed
Full speed
170
Full speed
Full speed
*1: When the Main Motor or I/C Motor remains energized for a continuous 300-ms period.
*2: When the Main Motor and I/C Motor remain deenergized for a continuous 10-s period.
Half speed
Half speed
*1 *2
Half speed
Half speed
Warm-up completed
Predrive
Agitation predrive
Fusing predrive
To Next Page
Loading...
