Minolta Di251 - Page 269

(6) I/O Check
• Checks the function of sensors.
(7) Movement Check
• Runs a specified mechanism to check for operation.
Touch Panel
Display
Setting
Scan-through ADF ✽ For details, see Option service manual.
Scanner ✽ For details, see Option service manual.
ADFR ✽ For details, see Option service manual.
Mail Bin Finisher ✽ For details, see DIS/REASSEMBLY, ADJUSTMENT.
Printer ✽ For details, see DIS/REASSEMBLY, ADJUSTMENT.
Finisher ✽ For details, see Option service manual.
Sift Tray/Job Tray ✽ For details, see Option service manual.
Touch Panel
Display
Setting
ADF Paper
Passage
Makes a paper passage check through the ADF.
<Procedure>
1. Select the paper passage mode.
2. Place paper on the Document Feed Tray.
3. Press the Start key.
Scanner Checks the Scanner for operation.
• Drives the CCD (for factory adjustment only and should NEVER be
used).
• Turns ON the Exposure Lamp.
• Moves the Scanner, the distance of movement being specified from
the 10-Key Pad.
<Procedure>
1. Enter the distance of movement from the 10-Key Pad.
2. Touch “Set”.
Exp. Lamp Check Checks the intensity of the Exposure Lamp light.