Minolta Di251 - Page 289

Mode Initial value
412
76543210
Bit: 00001000
HEX: 08
Bit Function
Logic
Description
01
7 Priority Sort Mode ✽
Bit7-6: 00 Non Sort Selection of the paper exit mode
that has priority when the paper
exit system option is installed.
6
01 sort
10
Setting
inhibit
11 Group
5 Priority Stapling Mode (copy)
OFF ON
Can be set simultaneously with a mode other
than "Non-sort" of MODE 412 Bit 7-6.
4 Priority Punch Mode (copy) ✽
OFF ON
Can be set simultaneously with each mode of
MODE 412 Bit 7-6.
3
Intelligent Sorting ✽
OFF
ON
Setting of changeover, or no changeover,
between sort and non-sort according to the
number of originals and the key operation.
2-0
Fixed Setting change inhibit
Mode Initial value
413
76543210
Bit: 00010100
HEX: 14
Bit Function
Logic
Description
01
7 FAX (Mail) Output Bin Specifica-
tion
✽
Bit7-6: 00 1st Drawer • Setting of tray to exit FAX
(mail) prints when a finisher is
installed.
• "Option tray" is effective
when the option tray is
installed.
6
01
Elevator
tray
10 Option tray
11
Setting
inhibit
5 PC Print Output Bin Specification
✽
Bit5-4: 00 1st Drawer • Setting of tray to exit PC
prints when a finisher is
installed.
• "Option tray" is effective when
the option tray is installed.
4
01
Elevator
tray
10 Option tray
11
Setting
inhibit
3
PC Print Output Bin Specification
✽
1bin 2bins
Setting of the bin to exit PC prints when a job
tray is installed.
2
Copy Output Bin Specification
✽
1bin 2bins
Setting of the bin to exit copies when a job tray
is installed.
1
FAX (Mail) Output Bin Specifica-
tion
✽
1bin 2bins
Setting of the bin to exit FAX (mail) prints
when a job tray is installed.
0
Fixed Setting change inhibit