FrameMaker Ver5.5E(PC) Di251/Di351 SWITCHES ON PWBs/TECH. REP. SETTINGS
05.03.01
S-51
Mode Initial value
423
76543210
Bit: 01001000
HEX: 48
Bit Function
Logic
Description
01
7
Plug-In Counter
Copy
Made
Copy
Cycles
Setting of threshold value of copy kit counter,
and viewing count value.
6 Key Counter ON
OFF Use of key counter or vender.
5 Vender Mode
Bit5-4: 00
Key
counter
Sets which of the key counter or
vender to set when these are
used.
4
01
Coin
vender
1
Card
keeper
11
Setting
inhibit
3
Original Size Detecting Option ON
OFF
Specifies whether or not original
size detecting sensor is applica-
ble to option.
2-0
Fixed Setting change inhibit
Mode Initial value
424
76543210
Bit: 00011000
HEX: 18
Bit Function
Logic
Description
01
7
Auto Paper Configuration
Mixed Limited
Sets whether or not the original size is to be
rounded off for destination in the auto paper
mode.
6 FLS Paper
Bit6-5: 00 210×330 Setting of sizes handled as FLS.
5 01 203 × 330
10 216 × 330
11 220 × 330
4
Copy Mode Limit (copy) YES
NO Sets whether or not to inhibit setting of "two-
sided copy" in the priority copy mode.
3 "Small" Originals Copy
disabled
Copy
enable
d
Sets whether to enable copying or emit an
alarm when an original that is smaller than the
minimum detectable size is loaded.
2
Function Limit
NO YES Sets whether or not to disable the settings of
some of the copy mode functions (application,
original copy).
1
Non-standard size original pro-
cessing when ADFR and A4/Let-
ter paper are selected (copy)
Pro-
cess
Do not
process
Setting when truncated A4T original (short
dimension about 210 mm ( long dimension
about 250 mm) is copied using ADFR.
0
Fixed Setting change inhibit
To Next Page
Loading...
