Mitel MiVoice Business SMB Controller User Manual

About SMB Controller
The SMB Controller is up and running in normal mode or emergency mode.
1. Shut-down the SMB Controller with the Shut-down button in the SMB Controller
Manager System reset view.
OR
Shut-down the SMB Controller with a long click (> 5s) of the pilot key (CTRL).
• The F0 - F6 LED flash orange while the applications are saving their data and are
closing (pattern [15]).
• The flashing orange LED stops and the LED F0 - F6 turns solid up orange. During
this phase the SMB Controller is saving its data and is closing (pattern [16]).
• The F0 - F6 LED and the SYS LED are slowly flashing red to indicate the shut-down
mode (pattern [17]).
2. You can now disconnect the SMB Controller from the power supply without concerns
within the next 90 seconds.
Note:
Removing the power cord before or after the controller is in shutdown mode could
corrupt the database.
Document Version 1.0
System Manual for Mitel SMB Controller 22

Mitel MiVoice Business SMB Controller Specifications

General

Brand	Mitel
Model	MiVoice Business SMB Controller
Category	Controller
Language	English