Mitel MiVoice Business SMB Controller User Manual

Deployment Steps for the MiVoice Business Solution on SMB Controller
Note:
If the SMB Controller features its default static IP address, a pop up window appears to
remind you that you must chose a different static address for your subnet. Click the OK
button to continue with the configuration.
2.
Configure Network settings:
•
Provide the host name, domain name in the respective fields.
•
In the Primary DNS and Secondary DNS field, enter the Primary and Secondary DNS IP
address.
3.
Configure Network interfaces:
•
If you are using static IP configuration:
a.
Deselect the DHCP checkbox for eth0.
b.
Enter the static IP address, the corresponding Subnet Mask, and the Gateway IP
address.
c.
Verify that eth1 is enabled.
•
If you are using dynamic IP configuration:
a.
Select the DHCP checkbox for eth0.
Document Version 1.0
93 System Manual for Mitel SMB Controller

Mitel MiVoice Business SMB Controller Specifications

General

Brand	Mitel
Model	MiVoice Business SMB Controller
Category	Controller
Language	English