Mobotix T25 - Page 100

100/128
T25 System Manual Part 2: System Expansion with MxEasy
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
3. If one of the ringing and mailbox or ringing profiles has been selected:
– Select the remote station or add a new remote station that will play the ringing
from the door station.
–
If you select MxEasy as Remote Station, you need to select or enter the IP address
of the computer that is running MxEasy. For a Voice-Over-IP call, you need to
set either a SIP phone number or the IP address of the VoIP phone that is to be
called (depending on the configuration). The SIP number is displayed as “*101”.
This is the name that had been specified for the Grandstream models on the SIP
server. “*101” is then resolved to the actual IP address of the Grandstream phone.
– Select how much time should elapse without the doorbell being answered before
a message is played to the visitor.
– Select the message that is played to the visitor.
– Activate the Record Message checkbox, if the visitor should should be able to
leave a message.
4. If the Announcement only checkbox had been selected:
– Select the message that is played to the visitor.
– Activate the Record Message checkbox, if the visitor should should be able to
leave a message.
5. Click on Next. The door camera is reconfigured. The Overview window opens.
If everything has been configured, click on Next. The selected door camera is listed in the
Overview window. Click on Finish to close the MxEasy Wizard.
The door station has been configured properly and MxEasy shows the live image of the
door station camera. For more information on using MxEasy and on the other application
settings (image optimization, recording, door station options, etc), please read the MxEasy
User Manual (www.mobotix.com> Support> Manuals).