8 Settings via the MICT
156 Rev. 03/2019
Coil Parameters
The following information is provided:
– Max. Breakdown Voltage [kV]
Displays the permitted value range for the maximum breakdown voltage in kV. The
maximum breakdown voltage is configured in the view Ignition Timing – Schedule A/B –
Energy (refer to Timing – Schedule A/B – Energy on page 104).
– Spark Intensity [mA]
Displays the permitted value range for the spark intensity in mA. The spark intensity is
configured in the view Ignition Timing – Schedule A/B – Energy (refer to Timing – Schedule
A/B – Energy on page 104).
– Secondary Voltage Estimation Calibration
Displays the permitted value range for the secondary voltage estimation calibration. The
calibration of the secondary voltage estimation takes place in the view Engine – Ignition
Coils (refer to Engine – Ignition Coils on page 94) and in the runtime adjustments (refer to
Runtime Adjustments – Secondary Voltage Estimation Calibration on page 147).
– Secondary Short Sensitivity
Displays the permitted value range for the calibration of the secondary short sensitivity. The
calibration of the secondary short sensitivity takes place in the view Engine – Ignition Coils
(refer to Engine – Ignition Coils on page 94) and in the runtime adjustments (refer to Runtime
Adjustments – Secondary Short Calibration on page 148).
To Next Page
Loading...
Need help?
General
