8 Settings via the MICT
Rev. 03/2019 87
8.11 Configuration
The window opens after you select the device type for a new configuration or an existing
configuration or have uploaded one from the ignition controller. You can make changes to the
configuration by selecting an entry from the navigation bar. The corresponding configuration
data are then displayed in the configuration section and can be processed. The following
sections will describe the settings and adjustments you can implement in the different areas.
Indication of invalid entries
An invalid selection or invalid input values are highlighted by pulsating
warning signs on the configuration pages of the MICT. Additional
information is provided in the status bar.
Example:
To Next Page
Loading...
Need help?
General
