4 Product Description
Rev. 03/2019 19
4.1.2 Mechanical Data
The MIC5 has the following mechanical characteristics.
Feature Value
Dimensions MIC5:
360.3 mm x 240 mm x 114.5 mm (14.19" x 9.45" x 4.51")
(length x width x height)
MIC5-SE:
304 mm x 240 mm x 95.5 mm (11.97" x 9.45" x 3.76")
(length x width x height)
Weight MIC5:
8.2 kg (18.1 lbs)
MIC5-SE:
3.9 kg (8.5 lbs)
Shape of device See chapter Overview Drawings on page 27
Mechanical environmental
conditions
The housing is resistant to general atmospheric
contaminations.
Resistant to gas engine lubricants.
MIC5:
Protection class: I
Protection: IP65
MIC5-SE:
Protection class: I
Protection: IP54
The specified protection classes and types are only
guaranteed if all external wiring connections are made in
accordance with the connector specification, all covers and
seals are installed as intended and the following tightening
torques are observed:
– All M4 bolts: 0.8 Nm to 1 Nm (0.6 lb-ft to 0.7 lb-ft)
– PG screw joints: 4.5 Nm to 5 Nm (3.3 lb-ft to 3.6 lb-ft)
– Service screw: 2.5 Nm to 3 Nm (1.9 lb-ft to 2.2 lb-ft)
Always use a new seal when installing the service cover.
Standard single seal inserts
for PG screw joints
Suitable for a cable with a diameter of 6 mm to 13 mm.
To Next Page
Loading...
Need help?
General
