18 Rev. 03/2019
4.1 Technical Data
4.1.1 Certifications
The ignition controllers of the MIC5 series are certified as per the following
directives/regulations:
CE
– EMC Directive 2014/30/EU
– EN 61326-1:2013 – Electrical equipment for measurement, control and laboratory use.
EMC requirements. General requirements
– EN 55011:2009 + A1:2010 – Industrial, scientific and medical equipment.
Radio-frequency disturbance characteristics. Limits and methods of measurement
– EN 61000-6-2:2005 + AC:2005 – Electromagnetic compatibility (EMC). Generic
standards. Immunity for industrial environments
– EN 61000-6-4:2007 + A1:2011 – Electromagnetic compatibility (EMC). Generic standards.
Emission standard for industrial environments
– Low Voltage Directive 2014/35/EU
– EN 61010-1:2010 – Safety requirements for electrical equipment for measurement,
control, and laboratory use. General requirements
– EN 60529:1991 + A1:2000 + A2:2013 – Degrees of protection provided by enclosures (IP
Code)
– RoHS Directive 2011/65/EU
CSA
– CSA Std C22.2 No. 0 -10
– CSA Std C22.2 No. 142-M1987 (R 2004)
– CSA Std C22.2 No. 213-M1987 (R 2004)
– ANSI/ISA 12.12.01, Ed. 1 (2007)
– UL Std No. 916, Ed. 3 (1998)
4 Product Description
To Next Page
Loading...
