7 Functions
Rev. 03/2019 69
The following functions are available on the different levels:
– Level 0 (Read Only)
Enables read-only access for all users.
– Level 1 (Operator)
The user can operate the Alarm Commands, Error Commands, and the Misfire Counter on
this level.
– Level 2 (Service)
Only the Service level has access to modifications of the runtime adjustments for Timing and
Energy and the commands Set Engine Hours, Set Spark Plug Hours. The Cylinder Individual
Offsets and the Settings for Self Test can also be executed in this operating level.
– Level 3 (Master)
On this level, the Master can, in addition to the other adjustments, modify the Reset Position
and Reset All PINs and Enable/Disable Access Control. This authorization is also needed to
transfer a configuration to an ignition controller.
For information on the access levels in the MICT, refer to the section Access Levels in the MICT on
page 71.
To Next Page
Loading...
Need help?
General
