MR ETOS ED - Page 52

4 Product description
Maschinenfabrik Reinhausen GmbH 202052 6385142/08 ENETOS
®
ED
Entering a value To enter a value, proceed as follows:
1. Use the rotary knob to select the value field and press the key.
ð If operating via the front panel, the numerical keypad appears.
Figure33: Entering a value
2. Enter the desired value and confirm with .
3. Press the Accept button to save the modified parameter.
Entering text
1. Use the rotary knob to select the text box and press the key.
ð If operating via the front panel, the keyboard appears.
Figure34: Entering text
2. Enter the desired text and confirm with .
3. Press the Accept button to save the modified parameter.