VJ-1628X OPERATION MANUAL Before using
3.7 Print quality adjustment 135
f. Press the [+] key or [-] key on Operation panel to select “XX>2: Adjust Print>”.
g. Press the [>] key on Operation panel.
• “Thickness 170µm” is displayed on the operation panel. (The default is set to 170µm. If the
default value has been changed, the changed value is displayed.)
h. Press the [+] key or [-] key and enter the thickness of the paper to use in the range of 80µm to
2800µm.
• This setting is the same as
5.1.1.1.8 Media thickness menu.
To Next Page
Loading...
Need help?
General