Before using VJ-1628X OPERATION MANUAL
90 3.5 Loading media
3.5.3 Setting the User Type Setting
This section explains how to set the user type setting.
Follow the procedure below to set the user type setting.
1. Turn ON the printer and load the media.
• After loading the media, the printer enters the User Type Setting menu.
• Refer to the following for setting the media.
3.5.2 Setting Roll Media
• Refer to the following for details on the User Type Setting menu.
5.1.1 User Type menu
2. Press the [+] key or [-] key on Operation panel to select the User Type Setting.
To Next Page
Loading...
Need help?
General