VJ-1628X OPERATION MANUAL Maintenance
6.4 Cleaning the printer 295
6.4 Cleaning the printer
Periodic (every month) cleaning is necessary to use the printer in good condition.
• Do not insert or drop metal or flammable objects into the printer through openings
such as a vent.
It could lead to an electric shock or fire.
• If foreign substances or liquids such as water entered the printer, do not use the
printer as it is.
It could lead to an electric shock or fire.
Immediately turn OFF the power switch, disconnect the power plug from the electric
socket, and contact your local MUTOH dealer.
• Unplug the power cable with the power off, before cleaning the outer case and
inside of the printer.
• Do not use volatile solvents such as thinner, benzene, or alcohol.
These solvents may cause damage to the paint.
• Make sure that no moisture enters the printer.
The electric circuit inside the printer may be short-circuited.
• Never open covers attached using screws under any circumstances.
This may cause an electric shock or a malfunction.
This section describes how to clean each part of the printer.
To Next Page
Loading...
Need help?
General