MUTOH ValueJet VJ-1628X - Media Set Menu

Panel setup menu VJ-1628X OPERATION MANUAL
222 5.1 Setup menu
5.1.4 Media Set menu
Sets whether to detect the media width and edge while initializing the media.
NOTE
• When Media Detection menu is set to “Off”, set the media width of the current media in Media
Width menu.
5.1.5 Media Width menu
• When the media detection is set to “Off”, the media cannot be cut automatically.
Setup item Setting Description
Init. Off The media will not be detected.
Top&Width Detect the media width and edge while initializing the media.
<Width> Detect the media width while initializing the media.
— • [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu