Panel setup menu VJ-1628X OPERATION MANUAL
216 5.1 Setup menu
5.1.1.1.7 Vacuum Fan menu
Sets up vacuum fan operation.
5.1.1.1.8 Media thickness menu
Sets the thickness of the media you are using.
Once the media thickness is entered, print quality is automatically adjusted.
• This menu is to automatically adjust print quality to a certain extent. If you want to improve print
quality, manually adjust it.
3.7 Print quality adjustment
• There is no problem even if you adjust print quality without setting the media thickness.
Setup item Setting Description
Vacuum Fan Low Set this if there is a possibility of paper jamming from media
feed failure when the setting is Middle.
Middle Set this if there is a possibility of paper jamming from media
feed failure when the setting is High.
<High> Set when using general media.
— • [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.1.1 User Type advanced setup menu
Setup item Setting Description
Media Thickness
80
µm to <170µm> to
2800
µm
Enter the thickness of the media you are using in increments
of 10µm.
- • [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.1.1 User Type advanced setup menu
To Next Page
Loading...
Need help?
General