EasyManuals Logo

MUTOH ValueJet VJ-1628X User Manual

MUTOH ValueJet VJ-1628X
358 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #180 background imageLoading...
Page #180 background image
Handling the printer VJ-1628X OPERATION MANUAL
180 4.4 Operating from Operation panel
4.4.3 Cutting media
This section explains how to cut media.
If Media ejection mode is set to Auto Cut, the printer cuts the media automatically after printing.
5.1.6 Output Mode menu
If you press the [Cutting] key on Operation panel more than two seconds while Operation panel is
Normal, you can cut the media at the desired position.
Follow the procedure below to cut the roll media.
1. Confirm that Operation panel is Normal.
2. Press the [Cutting] key on Operation panel for more than 2 seconds.
The printer feeds the roll media to the length of the margin and cuts the media.
NOTE
When loading the new roll media, cut the front edge of the media if it is not straight.
The cutter is a consumable component.
Replace it periodically.
6.3.4 Replacing Cutter
When the the media detection is set to “Off”, the media cannot be cut automatically.
5.1.4 Media Set menu

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MUTOH ValueJet VJ-1628X and is the answer not in the manual?

MUTOH ValueJet VJ-1628X Specifications

General IconGeneral
BrandMUTOH
ModelValueJet VJ-1628X
CategoryPrinter
LanguageEnglish

Related product manuals