VJ-1628X OPERATION MANUAL Panel setup menu
5.1 Setup menu 231
5.1.11 Head Travel menu
Sets up the range that Print head moves while printing.
• The minimum value for the shift width of Print head is 900mm.
• Note that when the printer is set as “Media width” or “Data width”, the shift width of Print head
does not become below 900mm, even though the width of the loaded media is below 900mm.
5.1.12 Multi Strike menu
Sets up the overwrite count per line.
The printer prints over the printed result times the set number of time, making the print results darker.
• When setting “W 7Color” or “W 8Color”, if “Multi Strike” is set to one time, the menu shifts to
5.1.12.1 Layer Multi Strike menu.
Setup item Setting Description
CR Movement Data Print head moves the range of the print data width.
The printing speed will be improved since the moving range
of Print head is optimized.
Machine Print head moves from origin to the maximum printable media
width.
<MediaWidth> Print head shifts within the media width.
— • [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu
Setup item Setting Description
Multi Strike <1 time> to 9 times Set the overwrite count.
— • [Enter] key: saves the setting and shifts to the previous
menu. Note that when setting "W 7Color" or "W 8Color" if
"Multi Strike" is set to one time, the menu shifts to the next
menu.
5.1.12.1 Layer Multi Strike menu
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu