Before using VJ-1628X OPERATION MANUAL
48 3.3 Sleep mode
3.3.1 Set sleep mode on the printer
1. Make sure that the printer's operating condition is as follows:
• Printing or other operation is not in progress.
• Operation panel display is in the Normal condition.
• There is ample amount of ink in the ink cartridges.
5.1.16 Ink Status menu
6.3.1 Replacing Ink cartridges
• There is enough free space in the waste fluid bottle.
6.5 Disposal of waste fluids
• Front cover is closed.
• Media loading lever is lowered (Media loading lever on the rear side is raised).
• Head height is not set to High.
2. Press the [Menu] key on Operation panel.
• “Menu1: Setup>” is displayed on Operation panel.
3. Use the [+] or [-] key on Operation panel to select “Menu 6: Sleep Mode>”.