VJ-1628X OPERATION MANUAL Before using
3.3 Sleep mode 49
4. Press the [>] key on Operation panel.
• “SleepMode1: SetTimer” is displayed on Operation panel.
When the color mode is set to “4Color” or “7Color”, step 5 is not displayed.Proceed to step 6.
5. Press the [Enter] key on Operation panel.
• “SetTimer1: Cleaning” is displayed on Operation panel.
• Set the Head cleaning interval while the printer is in Sleep Mode.If it has already been set, proceed
to step 8.
• When the color mode is set to “W 7Color” or “W 8Color”, you can press the [+] key or [-] key on
Operation panel to set “SetTimer2:Auto Sleep”.
5.6.1 Timer Setting menu
To Next Page
Loading...
