VJ-1628X OPERATION MANUAL Before using
3.4 Filling ink 57
3.4.2 When using 220ml Ink cartridges
Follow the procedure below to install the 220ml Ink cartridges.
The 220ml cartridges can be inserted horizontally or vertically.
This section describes the case of horizontal insertion angle only. Refer to "
3.4.3 When using 440ml Ink
cartridges
" for the case of vertical insertion.
1. Turn the printer ON.
• The printer starts the initializing operation.
• After the initial operation is compete, “Start Ink Charge – > E” is displayed on Operation panel.
2. Press the [Enter] key on Operation panel.
• “Ink Config.: 4Color” is displayed on Operation panel.