EasyManuals Logo

MUTOH ValueJet VJ-1628X User Manual

MUTOH ValueJet VJ-1628X
358 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #225 background imageLoading...
Page #225 background image
VJ-1628X OPERATION MANUAL Panel setup menu
5.1 Setup menu 225
5.1.6 Output Mode menu
Sets the media ejection method after printing.
NOTE
When the take-up unit is not installed, do not set Output mode to “Take-up”. By doing so, the
product will be unable to function properly.
When the Output Mode menu is set to “Take-up”, the setting for the Prev. Stick menu is disabled.
5.1.9 Prev. Stick menu
5.1.6.1 Ink Dry Time menu
Set the ink drying time.
Setup item Setting Description
Output mode <Off> Set when not cutting the media automatically after printing.
(Set it to Off even when cutting the media manually.)
[Enter] key: saves the setting and shifts to the sub menu.
5.1.6.1 Ink Dry Time menu
Take-up Set when using the take-up unit.
(The media will not be cut after printing.)
[Enter] key: saves the setting and shifts to the sub menu.
5.1.6.2 Page Gap menu
Auto cut Set when cutting the media automatically.
[Enter] key: saves the setting and shifts to the sub menu.
5.1.6.1 Ink Dry Time menu
[Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu
Setup item Setting Description
Ink dry time <0sec> to 60min Set the ink drying time.
[Enter] key: saves the setting and shifts to the previous
menu.
[Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.6 Output Mode menu

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MUTOH ValueJet VJ-1628X and is the answer not in the manual?

MUTOH ValueJet VJ-1628X Specifications

General IconGeneral
BrandMUTOH
ModelValueJet VJ-1628X
CategoryPrinter
LanguageEnglish

Related product manuals