Before using VJ-1628X OPERATION MANUAL
40 3.1 Power cord set connection
3.1 Power cord set connection
This section explains power cord set connection.
• Be sure to use the specified power cord set.
Using a power cord set other than the specified can cause an electric shock or fire.
• Do not use a damaged power cord set.
It could lead to an electric shock or fire.
• Pay attention to the following points when handling the power cord set.
• Do not tamper with the power cord set.
• Do not put heavy objects on the power cord set.
• Do not bend, twist or pull the power cord set by force.
• Do not route the power cord set near heating appliances.
• Contact your local MUTOH dealer if the power cord set is damaged.
Follow the procedure below to install the power cord set.
To Next Page
Loading...
