Handling the printer VJ-1628X OPERATION MANUAL
186 4.4 Operating from Operation panel
4.4.7 Starting printing during warming up
You can start printing while the printer is warming up, even though the heater temperature has not
reached the set temperature.
• Even when you start printing during warming up, warming up continues until the temperature
reaches the set temperature.
• If you start printing during warming up, print quality will not be guaranteed.
1. Confirm that the printer is warming up.
• “Warming Up” is displayed on Operation panel.
2. Print data will be sent.
• “Warming Up” and “Skip ->E” is displayed on Operation panel.
• While “Warming Up” is displayed, do not touch Platen and Media guide.
You could burn yourself.
3. To start printing during warming up, press the [Enter] key on Operation panel.
• The printer starts printing.