Panel setup menu VJ-1628X OPERATION MANUAL
230 5.1 Setup menu
5.1.9 Prev. Stick menu
Sets up to prevent media from sticking when printing starts.
• When the Output Mode menu is set to “Take-up”, the setting for the Prev. Stick menu is disabled.
5.1.6 Output Mode menu
5.1.10 Standby Heating menu
Sets the time to preheat Heater while the printer is in the standby mode.
Setup item Setting Description
Prev. Stick <Off> The stick-prevent operation is not performed.
On The stick-prevent operation is performed.
Feed the media back and forth to prevent from sticking.
— • [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu
Setup item Setting Description
Standby Heating 10 minutes - <60 minutes> Sets the time to pre-heat Heater.
When the preset time has passed, each Heater turns Off.
— • [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.1.1 User Type advanced setup menu
To Next Page
Loading...
Need help?
General