MUTOH ValueJet VJ-1628X - Standard Rough Adjustment Pattern

Before using VJ-1628X OPERATION MANUAL
124 3.7 Print quality adjustment
3.7.1.2 Standard rough adjustment pattern
Perform rough adjustment when the degree of misalignment is big.
Print rough adjustment pattern and register the set values.
1. Display the Standard Adjust Print menu on Operation panel in the same way as step 2 of
3.7.1.1
Standard confirmation pattern.
2. Press the [+] key or [-] key on Operation panel to select “Adj.2: Rough Pattern”.
3. Press the [Enter] key on Operation panel.
• “Warming Up Skip ->E” is displayed on Operation panel.
CAUTION
• While “Warming Up” is displayed, do not touch Platen and Media guide. They
become very hot and you could burn yourself.
NOTE
• You can start printing during warming up.
4.4.7 Starting printing during warming up